View A165E_8325390.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

c64i-e-01 1 emergency stop switch (16-dia.) A165E separate construction with smallest class of depth in the world ? direct opening mechanism to open contacts in emergen cies, such as when they are welded. ? conforms to en 60947-5-5. ? includes a safety lock to prevent misuse. ? features separate construction that allows the switch to be separated for easier wiring and one-piece construction that allows easier handling. ? models available with 3 contacts built into a single bloc k (a1 65e-u). model number structure list of models model number legend (completely assembled) .........................shipped as a set that includes the operation unit and light source. diameter of operation unit function model shape 30-mm models 40-mm models push-lock, turn-reset A165E separate construction (30-mm model) A165E- @ -03u one-piece construction (30-mm model) be sure to read the ?safety precautions? on page 9. s ls m lm none 24d 01 ip65 (oil-resistant) 02 03u 2. light source 1. operation unit shape and functions code 30 dia. 40 dia. 3. contacts code description spst-nc dpst-nc tpst-nc * * tpst-nc models have one-piece construction with the contact unit. only non-lighted models are available. note: models with separate construction (spst-nc and dpst-nc) are for normal loads only. one-piece models (tpst-nc) are for either normal loads or microloads. non-lighted lighted non-lighted lighted push-lock, turn-reset code non-lighted led 24 vac/ vdc5% 24 vac/ vdc --- --- functions type operation voltage rated voltage pushbutton ls 24d 02
2 A165E ordering information list of sets list of sets (in different colors) * models with yellow or gray pushbutton co lors cannot be used as emergency switches. individual parts (for switches with s eparate construction) operation units lamps switches switch units illumination rated voltage pushbutton color pushbutton size terminal contact form model led 24 vac/vdc red 30 dia. solder terminal spst-nc A165E-ls-24d-01 dpst-nc A165E-ls-24d-02 non-lighted --- spst-nc A165E-s-01 dpst-nc A165E-s-02 led 24 vac/vdc 40 dia. spst-nc A165E-lm-24d-01 dpst-nc A165E-lm-24d-02 non-lighted --- spst-nc A165E-m-01 dpst-nc A165E-m-02 non-lighted --- 30 dia. tpst-nc A165E-s-03u 40 dia. A165E-m-03u illumination pushbutton color * pushbutton size terminal contact form model non-lighted yellow 30 dia. solder terminal spst-nc A165E-sy-01 gray A165E-sgr-01 yellow dpst-nc A165E-sy-02 gray A165E-sgr-02 yellow tpst-nc A165E-sy-03u gray A165E-sgr-03u appearance illumination model 30 dia. non-lighted A165E-s lighted A165E-ls 40 dia. non-lighted A165E-m lighted A165E-lm appearance led color rated voltage model red bright 5 vdc a16-5dsr 12 vac/vdc a16-12dsr 24 vac/vdc a16-24dsr appearance illumination contact form model non-lighted spst-nc A165E-01 dpst-nc A165E-02 lighted spst-nc A165E-01l dpst-nc A165E-02l appearance illumination contact form model lighted spst-nc A165E-r-24d-01 dpst-nc A165E-r-24d-02
A165E 3 accessories (order separately) specifications certified standard ratings ul508, csa c22.2 no.14, ccc(gb14048.5) models with separate construction models with one-piece construction tv(en60947-5-1) models with separate construction models with one-piece construction certified standards * certification for csa c22.2 no. 14 has been obtained. separate construction models have been certified for the switch unit. switch ratings models with separate construction note: minimum applicable load: 5 vdc, 150 ma models with one-piece construction note: minimum applicable load: 5 vdc, 1 ma led ratings (only for models with leds) item appearance type model precautions yellow plate yellow, 45 dia. a16z-5070 use this as an emergency stop nameplate. panel plug round a16zt-3003 used for covering the panel cutouts for future panel expansion. degree of protection: ip40 color: black tightening tool --- a16z-3004 useful for repetitive mounting. be careful not to tighten excessively. extractor a16z-5080 convenient for extracting the switch and lamp. rated voltage resistive load 125 vac 250 vac 30 vdc 5 a 3 a 3 a rated voltage resistive load 125 vac 250 vac 30 vdc 1 a 0.5 a 1 a rated voltage resistive load 250 vac 30 vdc 3 a 3 a rated voltage resistive load 250 vac 30 vdc 0.5 a 1 a certification body standards file no. ul * ul508, csa c22.2 no.14 e41515 tv sd en60947-5-1 (certified direct opening), en60947-5-5 consult your omron representative for details. cqc (ccc) gb14048.5 2003010303070678 rated voltage resistive load 125 vac 250 vac 30 vdc 5 a 3 a 3 a rated voltage resistive load 125 vac 250 vac 30 vdc 1 a 0.5 a 1 a rated voltage rated current operation voltage 24 vac/vdc 8 ma 24 vac/vdc5%
4 A165E characteristics *1. led not mounted. (test them with the led removed.) *2. degree of protection from the front of the panel. operating characteristics structure and nomenclature type item emergency stop switch non-lighted A165E-s/A165E-m lighted A165E-ls/a165-lm non-lighted, one-piece construction A165E-u allowable operating frequency mechanical 20 operations/minute max. electrical 10 operations/minute max. insulation resistance 100 m min. (at 500 vdc) dielectric strength between terminals of same polarity 1,000 vac, 50/60 hz for 1 min between terminals of different polarity 2,000 vac 50/60 hz for 1 min between each terminal and ground 2,000 vac 50/60 hz for 1 min between lamp terminals 1,000 vac, 50/60 hz for 1 min * 1- - - vibration resistance malfunction 10 to 55 hz, 1.5-mm double amplitude (malfunction within 1 ms) shock resistance destruction 500 m/s 2 malfunction 300 m/s 2 max. (malfunction within 1 ms) 150 m/s 2 max. (malfunction within 1 ms) durability mechanical 100,000 operations min. electrical 100,000 operations min. degree of protection ip65 oil-resistant * 2 ip65 * 2 ip65 oil-resistant * 2 electric shock protection class class ii pti (tracking characteristic) 175 degree of contamination 3 (en60947-5-1) weight approx. 16 g (in case of dpst-nc switches) ambient operating temperature ?10 to 55 c (with no icing or condensation) ambient operating humidity 35% to 85% ambient storage temperature ?25 to 65 c (with no icing or condensation) type item characteristics of models with separate construction characteristics of models with one-piece construction operating force of max. 14.7 n 14.7 n releasing force rf min. 0.1 nm 0.1 nm pretravel pt 3.50.5 mm 3 0.5 mm switch holder operation unit color operation unit color ? models with led illumination: red ? non-lighted models * : red, yellow, or gray degree of protection ip65 oil resistance specifications for standard load 125 vac, 5 a 250 vac, 3 a 30 vdc, 3 a operation unit switch (the above figure is example of the separate construction model.) * models with yellow or gray pushbutton colo rs cannot be used as emergency switches.
A165E 5 dimensions (unit: mm) A165E-s mounting ring lock ring lock packing (t=0.5) 16 +0.2 dia. 0 3 +0.1 dia. 0 30 dia. non-lighted models 30 mm diameter 7.8 +0.3 0 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. m16 1 2.6 1.4 2.8 18 12.1 10.85 22.00.8 28.50.8 200.8 12.3 15.8 16 +0.2 dia. 0 3 +0.1 dia. 0 lock ring lock packing (t=0.5) mounting ring 30 dia. A165E-ls lighted models 30 mm diameter 0 7.8 +0.3 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. m16 1 2.8 18 12.1 10.80.5 22.10.8 28.50.8 200.8 12.3 4.85 15.8 2.6 1.4 28.50.8 20.50.8 21.50.5 1 A165E-s-03u lock packing (t=0.5) lock ring mounting ring 16 +0.2 dia. 0 3 +0.1 dia. 0 30 dia. 7.8 +0.3 0 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. non-lighted, one-piece construction models 30 mm diameter m16 1
6 A165E A165E-m mounting ring lock ring lock packing (t=0.5) 40 dia. switch non-lighted models 40 mm diameter 16 +0.2 dia. 0 3 +0.1 dia. 0 7.8 +0.3 0 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. m16 1 2.8 18 12.1 10.80.5 21.10.8 28.50.8 200.8 12.3 0.5 15.8 2.6 1.4 A165E-lm mounting ring lock ring lock packing (t=0.5) 40 dia. switch lighted models 40 mm diameter 16 +0.2 dia. 0 3 +0.1 dia. 0 7.8 +0.3 0 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. m16 1 0.5 12.3 15.8 2.8 6.05 18 10.80.5 22.10.8 28.50.8 200.8 A165E-m-03u mounting ring lock ring 40 dia. lock packing (t=0.5) one-piece construction models 40 mm diameter 3 +0.1 dia. 0 16 +0.2 dia. 0 7.8 +0.3 0 panel cutout dimensions when applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. recommended panel thickness: 0.5 to 3.2 mm. m16 1 21.50.5 20.5 0.8 28.50.8 1
A165E 7 accessories terminal arrangement note: the l+ and l ? terminals are not available with the non-lighted models. yellow plate (vinyl chloride) lock ring panel plugs (round type) a16zt-3003 ? select an appropriate panel plug ac cording to the panel design and mount from the front side of the panel. panel cutout dimensions are the same as those for the operation unit. tightening tool t=1 a16z-5070 15.6 dia. 45 dia. 12 12 15.8 0.1 dia. rough su rface 15 dia. 0 ?0.1 rough su rface 18 dia. a16z-3004 18 dia. spst switches dpst switches tpst switches nc1 nc1 l? l+ sw1 nc1 nc2 nc2 nc1 l? l+ sw1 sw2 nc2 nc1 nc3 stopper
8 A165E installation mounting to the panel (models with separate construction) after installing the operation unit, snap in the switch from the back of the panel. (1) installing the operation unit (2) mounting the switch (3) removing the switch ? snap on the switch to the operation unit. ? make sure that the switch has the correct orientation when snapping it onto the operation unit. ? align the white dot on the operation unit with the guide groove on the side of the switch marked with an ?l? as shown below, and push the switch into the operation unit until it clicks into place. confirm that the switch is securely in place before using. ? insert the prongs of the a16z-5080 extractor between the switch and the operation unit, grip the switch, and pull to remove. (4) installing the led lamp ? when mounting the lamp, make sure it is facing the direction shown in the following diagram. insert the lamp while matching the protruding part of the lamp and the small guides on the outer surface of the switch. panel mounting nut lock ring (included with the product) rubber packing (included with the product) or yellow plate (sold separately) edge lock cutout panel mounting nut (included with the product) lock hole lock ring (included with the product) rubber packing (included with the product) or yellow plate (sold separately) ? attach rubber packing or the yellow plate onto the operation unit from its terminal side. insert the operation unit into the panel from the front. install the lock ring and mounting nut from the terminal side and tighten. ? adjust the slits on the hole of rubber packing and yellow plate to the protruding part of the unit. ? rubber packing is not necessary when the yellow plate is used. ? tighten the nut to the torque of 0.29 to 0.49 nm. ? the operation unit should be installed with its protruding part adjusted to the slit of the panel hole. ? align the lock ring to the groove of the operation unit so that the edge is drawn to the panel side. white dot guide groove l marking extractor (a16z-5080) narrow guide protruding part wide guide
A165E 9 safety precautions be sure to read the precautions for all A165E models in the website at: http://www.ia.omron.com/. indication and meaning for safe use !caution if the operation unit is separated from the switch unit, the equipment will not stop, creating a hazardous condition. always confirm that safety functions are operating before starting operation. mounting ? always make sure that the power is turned off before mounting, removing, or wiring the switch, or performing maintenance. electrical shock or fire may result if the power is not turned off. ? the tightening torque is 0.29 to 0.49 nm. wiring ? be sure to use electrical wires that are a size appropriate for the applied voltage and carry current. pe rform soldering according to the conditions given below. if t he soldering is not properly performed, abnormal heating may result, possibly resulting in fire. 1. hand soldering: 30 w, within 5 s 2. dip soldering: 240 c, within 3 s wait for one minute after solderin g before exerting any external force on the solder. ? use non-corrosive resin fluid as the flux. ? make sure that the electric cord is wired so that it does not touch the unit. if the electric cord will touch the unit, then electric wires with a heat resistance of 100 c min. must be used. ? after wiring the switch, maintain an appropriate clearance and creepage distance. operating environment ? the ip65 model is designed with a degree of protection so that it will not sustain damage if it is subj ected to water from any direction to the front of the panel. ? the switch is intended for indoor use only. using the switch outdoor may cause it to fail. using the microload ? insert a contact protection circui t, if necessary, to prevent the reduction of life expectancy due to extreme wear on the contacts caused by loads where inrush curr ent occurs when the contact is opened and closed. ? the A165E- @ u (one-piece construction ) allows both a standard load (125 v at 1 a, 250 v at 0.5 a) and a microload. if a standard load is applied, however, the microload area cannot be used. if the microload area is used with a st andard load, the contact surface will become rough, and the opening and closing of the contact for a microload may become unreliable. ? the minimum applicable load is the n-level reference value. this value indicates the malfunction re ference level for the reliability level of 60% ( 60 ) (conforming to jis c5003). ? the equation, 60 = 0.5 x 10 ? 6 /time indicates that the estimated malfunction rate is less than 1/2, 000,000 with a reliability level of 60%. leds the led current-limiting re sistor is built-in, so external resistance is not required. operating torque ? do not exceed an operating torque of 0.49 nm in the direction of rotation. ? do not pull the operating button or apply excessive force to any side of the button. otherwise it may be damaged. indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. precautions for safe use supplementary comments on what to do or avoid doing, to use the product safely. precautions for correct use caution rated voltage internal limiting resistor 24 vac/vdc 2.4 k 0.15 ma 1 ma area of use v oltage (v) current (ma) in v alid area
A165E 10 others ? the oil-resistant ip65 uses nbr r ubber and is resistant to general cutting oil and cooling oil. some special oils cannot be used with the oil-resistant ip65, however, so contact your omron representative for details. ? if the panel is to be coated, make sure that the panel meets the specified dimensions after coating. ? due to the structure of the switch, severe shock or vibration may cause malfunctions or damage to the switch. also, most switches are made fr om resin and will be damaged if they come into contact with shar p objects. particul arly scratches on the operation unit may create visual and operational obtrusions. handle the switches with care, and do not throw or drop them. scre w driv er hammer do not allo w the switch to drop and hit the floor. do not place or drop hea vy objects on the switch. do not operate the switch with hard or sharp o b jects.
terms and conditions of sale 1. offer; acceptance . these terms and conditions (these "terms ") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "products ") by omron electronics llc and its subsidiary companies (?omron ?). omron objects to any terms or conditions proposed in buyer?s purchase order or other documents which are inconsistent with, or in addition to, these terms. 2. prices; payment terms. all prices stated are current, subject to change with- out notice by omron. omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. payments for products are due net 30 days unless otherwise stated in the invoice. 3. discounts. cash discounts, if any, will apply only on the net amount of invoices sent to buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to omron?s payment terms and (ii) buyer has no past due amounts. 4. interest. omron, at its option, may charge buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. orders . omron will accept no order less than $200 net billing. 6. governmental approvals. buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the impor- tation or sale of the products. 7. taxes . all taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on omron or required to be collected directly or indirectly by omron for the manufacture, production, sale, delivery, importa- tion, consumption or use of the products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by buyer to omron. 8. financial. if the financial position of buyer at any time becomes unsatisfactory to omron, omron reserves the right to stop shipments or require satisfactory security or payment in advance. if buyer fails to make payment or otherwise comply with these terms or any related agreement, omron may (without liabil- ity and in addition to other remedies) cancel any unshipped portion of prod- ucts sold hereunder and stop any products in transit until buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by buyer. buyer shall in any event remain liable for all unpaid accounts. 9. cancellation; etc. orders are not subject to rescheduling or cancellation unless buyer indemnifies omron against all related costs or expenses. 10. force majeure . omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. shipping; delivery. unless otherwise expressly agreed in writing by omron: a. shipments shall be by a carrier selected by omron; omron will not drop ship except in ?break down? situations. b. such carrier shall act as the agent of buyer and delivery to such carrier shall constitute delivery to buyer; c. all sales and shipments of products shall be fob shipping point (unless oth- erwise stated in writing by omron), at which point title and risk of loss shall pass from omron to buyer; provided that omron shall retain a security inter- est in the products until the full purchase price is paid; d. delivery and shipping dates are estimates only; and e. omron will package products as it deems proper for protection against nor- mal handling and extra charges apply to special conditions. 12. claims. any claim by buyer against omron for shortage or damage to the products occurring before delivery to the carrier must be presented in writing to omron within 30 days of receipt of shipment and include the original trans- portation bill signed by the carrier noting that the carrier received the products from omron in the condition claimed. 13. warranties . (a) exclusive warranty . omron?s exclusive warranty is that the products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by omron (or such other period expressed in writing by omron). omron disclaims all other warranties, express or implied. (b) limitations . omron makes no warranty or representation, express or implied, about non-infringement, merchantabil- ity or fitness for a particular purpose of the pro ducts. buyer acknowledges that it alone has determined that the products will suitably meet the requirements of their intended use. omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the products or oth- erwise of any intellectual property right. (c) buyer remedy . omron?s sole obli- gation hereunder shall be, at omron?s election, to (i) replace (in the form originally shipped with buyer responsible for labor charges for removal or replacement thereof) the non-complying product, (ii) repair the non-complying product, or (iii) repay or credit buyer an amount equal to the purchase price of the non-complying product; provided that in no event shall omron be responsi- ble for warranty, repair, indemnity or any other claims or expenses regarding the products unless omron?s analysis confirms that the products were prop- erly handled, stored, installed and maintained and not subject to contamina- tion, abuse, misuse or inappropriate modification. return of any products by buyer must be approved in writing by omron before shipment. omron compa- nies shall not be liable for the suitability or unsuitability or the results from the use of products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environ- ments. any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. see http:// www.omron247.com or contact your omron representative for pub- lished information. 14. limitation on liability; etc . omron companies shall not be liable for special, indirect, incidental, or consequential damages, loss of profits or production or commercial loss in any way connected with the products, whether such claim is based in contract, warranty, negligence or strict liability. further, in no event shall liability of omron companies exceed the individual price of the product on which liability is asserted. 15. indemnities . buyer shall indemnify and hold harmless omron companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, inves- tigation, litigation or proceeding (whether or not omron is a party) which arises or is alleged to arise from buyer's acts or omissions under these terms or in any way with respect to the products. without limiting the foregoing, buyer (at its own expense) shall indemnify and hold harmless omron and defend or set- tle any action brought against such companies to the extent based on a claim that any product made to buyer specifications infringed intellectual property rights of another party. 16. property; confidentiality. any intellectual property in the products is the exclu- sive property of omron companies and buyer shall not attempt to duplicate it in any way without the written permission of omron. notwithstanding any charges to buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of omron. all information and materials supplied by omron to buyer relating to the products are confidential and proprietary, and buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 17. export controls. buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to ?forbidden? or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. 18. miscellaneous . (a) waiver . no failure or delay by omron in exercising any right and no course of dealing between buyer and omron shall operate as a waiver of rights by omron. (b) assignment . buyer may not assign its rights hereunder without omron's written consent. (c) law. these terms are governed by the law of the jurisdiction of the home office of the omron company from which buyer is purchasing the products (without regard to conflict of law princi- ples). (d) amendment . these terms constitute the entire agreement between buyer and omron relating to the products, and no provision may be changed or waived unless in writing signed by the parties. (e) severability . if any provi- sion hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) setoff . buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) definitions . as used herein, ?including ? means ?including without limitation?; and ?omron compa- nies ? (or similar words) mean omron corporation and any direct or indirect subsidiary or affiliate thereof. certain precautions on specifications and use 1. suitability of use . omron companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the product in the buyer?s application or use of the product. at buyer?s request, omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the product. this information by itself is not sufficient for a complete determination of the suitability of the prod- uct in combination with the end product, machine, system, or other application or use. buyer shall be solely responsible for determining appropriateness of the particular product with respect to buyer?s application, product or system. buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) use in consumer products or any use in significant quantities. (iii) energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equip- ment, and installations subject to separate industry or government regulations. (iv) systems, machines and equipment that could present a risk to life or prop- erty. please know and observe all prohibitions of use applicable to this prod- uct. never use the product for an application involving serious risk to life or property or in large quantities without ensuring that the system as a whole has been designed to address the risks, and that the omron?s pro duct is prop- erly rated and installed for the intended use within the overall equipment or system. 2. programmable products. omron companies shall not be responsible for the user?s programming of a programmable product, or any consequence thereof. 3. performance data . data presented in omron company websites, catalogs and other materials is provided as a guide for the user in determining suitabil- ity and does not constitute a warranty. it may represent the result of omron?s test conditions, and the user must correlate it to actual application require- ments. actual performance is subject to the omron?s warranty and limitations of liability. 4. change in specifications . product specifications and accessories may be changed at any time based on improvements and other reasons. it is our prac- tice to change part numbers when published ratings or features are changed, or when significant construction changes are made. however, some specifica- tions of the product may be changed without any notice. when in doubt, spe- cial part numbers may be assigned to fix or establish key specifications for your application. please consult with your omron?s representative at any time to confirm actual specifications of purchased product. 5. errors and omissions. information presented by omron companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
omron canada, inc. ? head office toronto, on, canada ? 416.286.6465 ? 866.986.6766 ? www.omron247.com omron electronics de mexico ? head office mxico df ? 52. 55.59.01.43.00 ? 01-800-226-6766 ? mela@omron.com omron electronics de mexico ? sales office apodaca, n.l. ? 52.81.11.56.99.20 ? 01-800-226-6766 ? mela@omron.com omron eletr?nica do brasil ltda ? head office s?o paulo, sp, brasil ? 55.11.2101.6300 ? www.omron.com.br omron argentina ? sales office cono sur ? 54.11.4783.5300 omron chile ? sales office santiago ? 56.9.9917.3920 other omron latin america sales 54.11.4783.5300 authorized distributor: $64i-e-01 0/14 note: specifications are subject to change. ? 2014 omron electronics llc printed in u.s.a. printed on recycled paper. automation control systems ? machine automation controllers (mac) ? programmable controllers (plc) ? operator interfaces (hmi) ? distributed i/o ? software d rives & motion controls ? servo & ac drives ? motion controllers & encoders temperature & process controllers ? single and multi-loop controllers sensors & vision ? proximity sensors ? photoelectric sensors ? fiber-optic sensors ? amplified photomicrosensors ? measurement sensors ? ultrasonic sensors ? vision sensors industrial components ? rfid/code readers ? relays ? pushbuttons & indicators ? limit and basic switches ? timers ? counters ? metering devices ? power supplies s afety ? laser scanners ? safety mats ? edges and bumpers ? programmable safety controllers ? light curtains ? safety relays ? safety interlock switches omron automation and safety ? the americas headquarters ? chicago, il usa ? 847.843.7900 ? 800.556.6766 ? www.omron247.com omron europe b.v. ? wegalaan 67-69, nl-2132 jd, hoofddorp, the netherlands. ? +31 (0) 23 568 13 00 ? www.industrial.omron.eu

▲Up To Search▲

Price & Availability of A165E

	To Download A165E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .